Toyota Tacoma Bolt Pattern: Complete Chart by Year
If you are buying aftermarket wheels or replacing a damaged wheel on a Toyota Tacoma, the bolt pattern is one of the first specifications you need to check. But Tacoma fitment is not quite as simple as using the model year alone.
The Toyota Tacoma has used 5×114.3 mm and 6×139.7 mm bolt patterns over its history. From 1995 through 2015, the correct pattern depends on the truck’s configuration. From 2016 onward, Tacoma uses 6×139.7 mm (6×5.5 inches).
This guide covers the Toyota Tacoma bolt pattern from 1995 through 2026, including center bore, lug thread, configuration differences, wheel interchangeability, and how to verify the pattern before buying wheels.
Quick Answer: What Is the Toyota Tacoma Bolt Pattern?
The Toyota Tacoma bolt pattern depends on the model year and configuration:
- 1995–2004: 5×114.3 or 6×139.7, depending on configuration
- 2005–2015: 5×114.3 or 6×139.7, depending on configuration
- 2016–2023: 6×139.7 mm (6×5.5 inches)
- 2024–2026: 6×139.7 mm (6×5.5 inches)
The important distinction is that 1995–2015 Tacomas were not all built with the same bolt pattern. Two Tacomas from the same model year can have different patterns depending on drivetrain and configuration.
For a complete wheel-fitment check, also verify the center bore, lug thread, wheel diameter, width, offset, and brake clearance.
Toyota Tacoma Bolt Pattern Chart 1995–2026
| Year | Generation | Bolt Pattern | Configuration | Center Bore | Lug Thread |
| 1995 | 1st Gen | 5×114.3 / 6×139.7 | 2WD / 4WD | 67.1 / 106.1 mm | M12×1.5 |
| 1996 | 1st Gen | 5×114.3 / 6×139.7 | 2WD / 4WD | 67.1 / 106.1 mm | M12×1.5 |
| 1997 | 1st Gen | 5×114.3 / 6×139.7 | 2WD / 4WD | 67.1 / 106.1 mm | M12×1.5 |
| 1998 | 1st Gen | 5×114.3 / 6×139.7 | 2WD / 4WD / PreRunner | 67.1 / 106.1 mm | M12×1.5 |
| 1999 | 1st Gen | 5×114.3 / 6×139.7 | 2WD / 4WD / PreRunner | 67.1 / 106.1 mm | M12×1.5 |
| 2000 | 1st Gen | 5×114.3 / 6×139.7 | 2WD / 4WD / PreRunner | 67.1 / 106.1 mm | M12×1.5 |
| 2001 | 1st Gen | 5×114.3 / 6×139.7 | 2WD / 4WD / PreRunner / S-Runner | 67.1 / 106.1 mm | M12×1.5 |
| 2002 | 1st Gen | 5×114.3 / 6×139.7 | 2WD / 4WD / PreRunner / S-Runner | 67.1 / 106.1 mm | M12×1.5 |
| 2003 | 1st Gen | 5×114.3 / 6×139.7 | 2WD / 4WD / PreRunner / S-Runner | 67.1 / 106.1 mm | M12×1.5 |
| 2004 | 1st Gen | 5×114.3 / 6×139.7 | 2WD / 4WD / PreRunner / S-Runner | 67.1 / 106.1 mm | M12×1.5 |
| 2005 | 2nd Gen | 5×114.3 / 6×139.7 | 2WD / 4WD / PreRunner / X-Runner | 60.1 / 106.1 mm | M12×1.5 |
| 2006 | 2nd Gen | 5×114.3 / 6×139.7 | 2WD / 4WD / PreRunner / X-Runner | 60.1 / 106.1 mm | M12×1.5 |
| 2007 | 2nd Gen | 5×114.3 / 6×139.7 | 2WD / 4WD / PreRunner / X-Runner | 60.1 / 106.1 mm | M12×1.5 |
| 2008 | 2nd Gen | 5×114.3 / 6×139.7 | 2WD / 4WD / PreRunner / X-Runner | 60.1 / 106.1 mm | M12×1.5 |
| 2009 | 2nd Gen | 5×114.3 / 6×139.7 | 2WD / 4WD / PreRunner / X-Runner | 60.1 / 106.1 mm | M12×1.5 |
| 2010 | 2nd Gen | 5×114.3 / 6×139.7 | 2WD / 4WD / PreRunner / X-Runner | 60.1 / 106.1 mm | M12×1.5 |
| 2011 | 2nd Gen | 5×114.3 / 6×139.7 | 2WD / 4WD / PreRunner / X-Runner | 60.1 / 106.1 mm | M12×1.5 |
| 2012 | 2nd Gen Facelift | 5×114.3 / 6×139.7 | 2WD / 4WD / PreRunner / X-Runner | 60.1 / 106.1 mm | M12×1.5 |
| 2013 | 2nd Gen Facelift | 5×114.3 / 6×139.7 | 2WD / 4WD / PreRunner / X-Runner | 60.1 / 106.1 mm | M12×1.5 |
| 2014 | 2nd Gen Facelift | 5×114.3 / 6×139.7 | 2WD / 4WD / PreRunner | 60.1 / 106.1 mm | M12×1.5 |
| 2015 | 2nd Gen Facelift | 5×114.3 / 6×139.7 | 2WD / 4WD / PreRunner | 60.1 / 106.1 mm | M12×1.5 |
| 2016 | 3rd Gen | 6×139.7 | Tacoma configurations | 106.1 mm | M12×1.5 |
| 2017 | 3rd Gen | 6×139.7 | Tacoma configurations | 106.1 mm | M12×1.5 |
| 2018 | 3rd Gen | 6×139.7 | Tacoma configurations | 106.1 mm | M12×1.5 |
| 2019 | 3rd Gen | 6×139.7 | Tacoma configurations | 106.1 mm | M12×1.5 |
| 2020 | 3rd Gen Facelift | 6×139.7 | Tacoma configurations | 106.1 mm | M12×1.5 |
| 2021 | 3rd Gen Facelift | 6×139.7 | Tacoma configurations | 106.1 mm | M12×1.5 |
| 2022 | 3rd Gen Facelift | 6×139.7 | Tacoma configurations | 106.1 mm | M12×1.5 |
| 2023 | 3rd Gen Facelift | 6×139.7 | Tacoma configurations | 106.1 mm | M12×1.5 |
| 2024 | 4th Gen | 6×139.7 | Tacoma configurations | ~95.1–95.2 mm | M14×1.5 |
| 2025 | 4th Gen | 6×139.7 | Tacoma configurations | ~95.1–95.2 mm | M14×1.5 |
| 2026 | 4th Gen | 6×139.7 | Tacoma configurations | ~95.1–95.2 mm | M14×1.5 |
Detailed fitment data confirms the configuration-specific 5-lug and 6-lug split on older Tacomas. For example, the 2001 Tacoma 2.4 4×2 and 3.4 4×2 use 5×114.3, while the 2.7 4×4, PreRunner, 3.4 4×4, and S-Runner use their respective documented patterns.
The same distinction continues in the second generation. The 2005 Tacoma 2.7 2WD and X-Runner use 5×114.3, while 4WD and PreRunner configurations use 6×139.7.
The 2015 data provides a particularly clear example: the 2.7 2WD uses 5×114.3 and a 60.1-mm center bore, while the 2.7 4WD, PreRunner, and 4.0 configurations use 6×139.7 and a 106.1-mm center bore.
Toyota Tacoma Bolt Pattern by Generation
| Generation | Model Years | Bolt Pattern |
| 1st Generation | 1995–2004 | 5×114.3 or 6×139.7 |
| 2nd Generation | 2005–2015 | 5×114.3 or 6×139.7 |
| 3rd Generation | 2016–2023 | 6×139.7 |
| 4th Generation | 2024–2026 | 6×139.7 |
This is the simplest way to understand Tacoma bolt-pattern history. The major change occurred in 2016, when the Tacoma moved to a six-lug 6×139.7 setup across the lineup.
Toyota Tacoma Bolt Pattern Explained
The Toyota Tacoma does not have one bolt pattern across every model year. Older Tacomas used both 5×114.3 mm and 6×139.7 mm, depending on the configuration, while 2016 and newer Tacomas use 6×139.7 mm (6×5.5 inches). For example, a 2015 Tacoma 2WD uses 5×114.3, while its 4WD and PreRunner versions use 6×139.7.
What Does 5×114.3 Mean?
5×114.3 means the wheel has five lug holes arranged on a 114.3-mm bolt circle, commonly called 5×4.5 inches.
On Tacoma models that use this pattern, you cannot substitute a 6-lug wheel simply because the wheel diameter or tire size looks correct. The number of lugs and the bolt-circle diameter have to match the truck.
What Does 6×139.7 Mean?
6×139.7 means the wheel has six lug holes on a 139.7-mm bolt circle, also known as 6×5.5 inches.
This is the Tacoma pattern used across the third and fourth generations. It is also found on many 4WD and PreRunner Tacomas from earlier generations.
How to Identify Your Tacoma’s Exact Pattern
The safest approach is to start with the model year and configuration, not the generation alone.
A 2015 Tacoma is a good example: the 2.7L 2WD uses 5×114.3 with a 60.1-mm center bore, while the 2.7L 4WD and PreRunner use 6×139.7 with a 106.1-mm center bore.
You can also count the wheel’s lug holes. A five-lug Tacoma uses 5×114.3; a six-lug Tacoma uses 6×139.7. For a wheel purchase, though, confirm the exact factory specification rather than relying only on a visual check.
One more detail matters on newer trucks: 2024+ Tacoma remains 6×139.7, but its hub and wheel hardware specifications differ from the previous generation. Toyota’s 2024 owner’s manual lists the factory wheel sizes and wheel-nut torque, so the bolt pattern should not be treated as the only fitment measurement.
The practical rule is simple: match the bolt pattern first, then verify center bore, lug thread, wheel width, diameter, and offset before ordering aftermarket wheels.
Toyota Tacoma Wheel Fitment Specifications
The bolt pattern tells you how the wheel attaches to the hub, but it does not tell you whether the wheel will actually fit. A proper Tacoma wheel match also requires the correct center bore, lug thread, wheel dimensions, and clearance.
Center Bore
The center bore is the opening in the middle of the wheel that fits over the Tacoma’s hub.
For older 5-lug Tacomas, the bore differs from the 6-lug models. The commonly documented specifications are 67.1 mm for 1995–2004 5-lug trucks and 60.1 mm for 2005–2015 5-lug configurations. Six-lug Tacomas through 2023 use a 106.1-mm hub bore.
The fourth-generation Tacoma changed to approximately a 95.2-mm hub bore while retaining the 6×139.7 bolt pattern.
Lug Thread
Most Tacoma models through 2023 use M12×1.5 wheel studs. The 2024–2026 Tacoma uses the larger M14×1.5 specification.
This is an easy detail to overlook when buying aftermarket wheels or replacement lug nuts, particularly when comparing a 2024+ Tacoma with an older 6-lug model.
Wheel Diameter, Width, and Offset
Once the bolt pattern and hub specifications are confirmed, check the wheel’s diameter, width, and offset against your specific Tacoma.
Offset determines how far the wheel sits inward or outward relative to the hub. An aggressive offset can create clearance issues with the suspension, fender, or steering components even when the bolt pattern is correct.
For this reason, “6×139.7 fits Tacoma” should never be treated as a complete fitment confirmation.
The Practical Rule
Before ordering aftermarket wheels, verify these specifications together:
Bolt pattern → center bore → lug thread → wheel size → offset → clearance.
That approach is especially important when swapping wheels between Tacoma generations, because a shared 6×139.7 pattern does not mean every 6-lug Tacoma wheel is a direct fit.
Can You Swap Toyota Tacoma Wheels Between Generations?
A matching bolt pattern is only the first requirement for a wheel swap. Tacoma generations can share the 6×139.7 pattern while still using different hub dimensions or wheel specifications.
The clearest example is the third- and fourth-generation Tacoma. 2016–2023 models use a 106.1-mm center bore, while 2024–2026 models use a 95.2-mm bore.
That means a wheel from a 2016–2023 Tacoma is not automatically a direct-fit wheel for a 2024–2026 truck simply because both use 6×139.7. The hub interface and wheel design still have to be checked.
The reverse situation can also create problems. A wheel designed specifically around the smaller fourth-generation hub may not provide the correct fit on an older Tacoma without the proper specifications.
Older Tacoma generations are even less interchangeable because many 1995–2015 configurations use 5×114.3 rather than 6×139.7. A 5-lug wheel cannot be directly mounted to a 6-lug hub.
Read More: Best Tires for Toyota Tacoma
What should you check before swapping?
For any cross-generation wheel swap, verify the bolt pattern, center bore, lug-thread specification, wheel diameter, wheel width, offset, load rating, and brake clearance.
Toyota itself emphasizes that proper wheel offset and brake clearance are part of correct wheel fitment; its 2024 Tacoma TRD wheel specification, for example, was engineered around the vehicle’s required offset and clearance rather than bolt pattern alone.
The practical rule: treat the bolt pattern as the starting point, not the final fitment test. A wheel is a proper match only when all of its critical dimensions work with your specific Tacoma.
How to Measure a Toyota Tacoma Bolt Pattern
When the model year or configuration is uncertain, you can verify the bolt pattern directly from the wheel. This is particularly useful on an older Tacoma that may have aftermarket wheels or a configuration that is easy to misidentify.
First, count the lug holes. Five lugs means you are dealing with a 5-lug pattern; six lugs means it is a 6-lug pattern.
For a 6-lug wheel, measure from the center of one lug hole straight across to the center of the opposite lug hole. A measurement of about 139.7 mm (5.5 inches) indicates a 6×139.7 pattern.
For a 5-lug wheel, measuring the pattern is less intuitive because there is no lug directly opposite another one. The measurement needs to be taken using the correct five-lug reference points; a bolt-pattern gauge is the most reliable option when precision matters.
Don’t confuse wheel diameter with bolt-pattern diameter. A 16-inch or 17-inch wheel describes the wheel’s diameter, while 114.3 mm or 139.7 mm describes the diameter of the imaginary circle passing through the lug centers.
For a Tacoma, the expected results are generally 5×114.3 (5×4.5) or 6×139.7 (6×5.5), depending on the truck’s year and configuration.
Related Topic: Toyota Tacoma Tire Pressure
The safest way to verify your Tacoma
For an unmodified truck, check the exact year and configuration first, then use the physical wheel measurement as a double-check. This is more dependable than identifying the bolt pattern from the wheel’s appearance alone.
And remember: confirming the bolt pattern only establishes the PCD. Center bore, lug-thread specification, offset, wheel width, diameter, and brake clearance still need to be verified before installing aftermarket wheels.
A Common Tacoma Bolt-Pattern Mistake
One of the easiest mistakes is assuming that all 1995–2015 Tacomas use 5×114.3.
They do not.
The detailed fitment data shows 5×114.3 on several 2WD and sport-oriented configurations, while 4WD and PreRunner configurations commonly use 6×139.7. The 2001 Tacoma, for example, clearly shows both patterns within the same model year.
The 2015 Tacoma provides another clear example: its 2.7 2WD is 5×114.3, while the 2.7 4WD, PreRunner, and 4.0 versions are 6×139.7.
There is also a useful historical detail with the X-Runner. The 2013 Tacoma X-Runner used 5×114.3, but Toyota USA announced that the X-Runner was discontinued for the 2014 U.S. Tacoma lineup.
Toyota Tacoma Bolt Pattern FAQs
What is the bolt pattern on a Toyota Tacoma?
It depends on the year and configuration. 1995–2015 Tacomas can use 5×114.3 or 6×139.7, while 2016–2026 Tacomas use 6×139.7 mm.
Is 6×139.7 the same as 6×5.5?
Yes. 6×139.7 mm and 6×5.5 inches describe the same bolt-circle pattern using metric and imperial measurements.
What is the bolt pattern on a 2015 Tacoma?
A 2015 Tacoma can use 5×114.3 or 6×139.7, depending on configuration. A 2WD model and a 4WD or PreRunner should not automatically be assumed to have the same pattern.
What is the bolt pattern on a 2020 Tacoma?
The 2020 Tacoma uses 6×139.7 mm (6×5.5 inches). The third-generation Tacoma uses a 106.1-mm center bore and M12×1.5 lug specification.
What is the bolt pattern on a 2024 Tacoma?
The 2024 Tacoma uses 6×139.7 mm. It also uses approximately a 95.1–95.2-mm center bore and M14×1.5 lug-thread specification.
Will 6×139.7 wheels fit every Tacoma?
No. A matching bolt pattern does not guarantee complete fitment. You still need to check the center bore, lug hardware, wheel dimensions, offset, and clearance.
Are 2016–2023 and 2024–2026 Tacoma wheels interchangeable?
Not automatically. Both generations use 6×139.7, but the 2024+ Tacoma has a different hub bore and lug-thread specification. Complete wheel fitment must be verified before making the swap.
Can I use a 5×114.3 wheel on a 6×139.7 Tacoma?
No. These are different bolt patterns. A five-lug 5×114.3 wheel is not a direct-fit replacement for a six-lug 6×139.7 Tacoma wheel.
How do I know which bolt pattern my Tacoma has?
Start with the model year and configuration, then confirm the number of lug holes on the actual wheel or hub. For 1995–2015 trucks, configuration is particularly important because both five-lug and six-lug setups were used.
Final Verdict
The Toyota Tacoma has used more than one bolt pattern, so model year and configuration matter. Tacoma models from 1995–2015 can use either 5×114.3 or 6×139.7, while 2016–2026 Tacomas use 6×139.7 mm (6×5.5 inches).
If you’re buying wheels for a 1995–2015 Tacoma, confirm whether your truck is a 5-lug or 6-lug configuration before ordering. For 2016 and newer models, 6×139.7 is the correct starting point, but you should still verify the center bore, lug-thread specification, offset, wheel size, and clearance.
The biggest fitment change to remember is the 2024 Tacoma. It retains the 6×139.7 bolt pattern but uses a smaller hub bore and M14×1.5 lug specification, so a shared bolt pattern does not automatically mean a direct wheel swap.
Bottom line: Match the complete wheel specifications—not just the bolt pattern—to ensure the wheel is actually compatible with your Tacoma.
