Toyota RAV4 Bolt Pattern: Year-by-Year Wheel Fitment Guide

The Toyota RAV4 bolt pattern is 5×114.3 mm, also written as 5×4.5 inches. This five-lug pattern has remained consistent across U.S.-market RAV4 model years from 1996 through 2026, including the all-new sixth-generation 2026 RAV4.

If you’re replacing your RAV4’s wheels or shopping for aftermarket rims, the bolt pattern is an important starting point—but it is not the only specification that matters.

You also need to consider the center bore, wheel diameter, width, offset, brake clearance, tire size, load rating, and lug hardware. This guide explains the RAV4 bolt pattern by year and shows what else to check before buying wheels.

Toyota RAV4 Bolt Pattern Chart by Year

For U.S.-market RAV4s, Toyota introduced the model for the 1996 model year. The bolt pattern has remained 5×114.3 mm (5×4.5 inches) through the 2026 model year. Toyota identifies the 2026 RAV4 as an all-new sixth-generation model, but current fitment data still lists the same 5×114.3 bolt pattern.

Model Year	Generation	Bolt Pattern
1996	1st Generation (XA10)	5×114.3 mm
1997	1st Generation (XA10)	5×114.3 mm
1998	1st Generation (XA10)	5×114.3 mm
1999	1st Generation (XA10)	5×114.3 mm
2000	1st Generation (XA10)	5×114.3 mm
2001	2nd Generation (XA20)	5×114.3 mm
2002	2nd Generation (XA20)	5×114.3 mm
2003	2nd Generation (XA20)	5×114.3 mm
2004	2nd Generation (XA20)	5×114.3 mm
2005	2nd Generation (XA20)	5×114.3 mm
2006	3rd Generation (XA30)	5×114.3 mm
2007	3rd Generation (XA30)	5×114.3 mm
2008	3rd Generation (XA30)	5×114.3 mm
2009	3rd Generation (XA30)	5×114.3 mm
2010	3rd Generation (XA30)	5×114.3 mm
2011	3rd Generation (XA30)	5×114.3 mm
2012	3rd Generation (XA30)	5×114.3 mm
2013	4th Generation (XA40)	5×114.3 mm
2014	4th Generation (XA40)	5×114.3 mm
2015	4th Generation (XA40)	5×114.3 mm
2016	4th Generation (XA40)	5×114.3 mm
2017	4th Generation (XA40)	5×114.3 mm
2018	4th Generation (XA40)	5×114.3 mm
2019	5th Generation (XA50)	5×114.3 mm
2020	5th Generation (XA50)	5×114.3 mm
2021	5th Generation (XA50)	5×114.3 mm
2022	5th Generation (XA50)	5×114.3 mm
2023	5th Generation (XA50)	5×114.3 mm
2024	5th Generation (XA50)	5×114.3 mm
2025	5th Generation (XA50)	5×114.3 mm
2026	6th Generation	5×114.3 mm

Independent fitment references list 5×114.3 for the first-generation U.S. RAV4, later generations, and the 2026 model. Cars & Collectibles also lists the 5×4.5 equivalent across its 1996–2023 RAV4 data, while TireSize411 reports no bolt-pattern change across its 2000–2026 coverage.

Important: A matching 5×114.3 bolt pattern does not automatically mean that every RAV4 wheel is interchangeable. Wheel diameter, width, offset, center bore, brake clearance, tire size, and lug hardware can vary by year, trim, and wheel application. The bolt pattern is only the first part of a complete wheel-fitment check.

Toyota RAV4 Wheel Fitment Specs

The bolt pattern tells you how the wheel’s lug holes are arranged, but you need several other measurements to determine whether a wheel is actually suitable for your RAV4.

Wheel Fitment Specification	Toyota RAV4
Bolt Pattern	5×114.3 mm (5×4.5 in)
Center Bore	60.1 mm
Lug Thread	M12x1.5
Wheel Offset	Varies by year, trim, and wheel
Wheel Diameter	Varies by year and trim
Wheel Width	Varies by application

Fitment references list a 60.1 mm center bore and M12x1.5 thread specification for RAV4 applications, while wheel diameter, width, and offset can vary. For example, different RAV4 applications can use different wheel widths and offsets even while retaining the same 5×114.3 bolt pattern.

The center bore is the hole in the middle of the wheel that fits over the vehicle’s hub. A larger aftermarket wheel bore can be used in some applications with the correct hub-centric ring, but a smaller bore will not fit over a larger hub.

The M12x1.5 specification refers to the lug thread. When using aftermarket wheels, don’t assume the factory lug nuts are automatically correct. The lug nut’s thread and seat must match both the vehicle and the wheel.

Offset is not one universal RAV4 number. It can change with wheel width, wheel design, trim, and model year. That is why a wheel with the correct bolt pattern can still sit too far inward or outward if its offset is unsuitable.

Wheel diameter and width also vary. The 2026 RAV4, for example, is offered with different factory wheel configurations, including 18-inch and 20-inch applications depending on grade.

What Does 5×114.3 Mean?

The 5×114.3 number describes the RAV4’s wheel bolt pattern. It tells you how many lug holes the wheel has and the diameter of the circle those holes are arranged around.

The 5 means the wheel has five lug holes. The 114.3 mm refers to the diameter of the imaginary circle that passes through the centers of those five holes.

So, when a wheel is listed as 5×114.3, it is designed for a vehicle with five lug positions arranged on a 114.3 mm bolt circle.

Is 5×114.3 the Same as 5×4.5?

Yes. They describe the same bolt pattern using different units.

114.3 mm converts to about 4.5 inches, so 5×114.3 mm is commonly written as 5×4.5 inches in the U.S.

For a Toyota RAV4, you can treat 5×114.3 and 5×4.5 as the same bolt-pattern specification.

Keep in mind, though, that matching the bolt pattern does not guarantee that a wheel will fit your RAV4. You should also check the wheel’s center bore, offset, width, diameter, and brake clearance before buying.

Will 5×114.3 Wheels Fit a Toyota RAV4?

Not necessarily. A wheel with the correct 5×114.3 bolt pattern matches the RAV4’s lug-hole pattern, but that alone does not guarantee a proper fit.

Before buying a wheel, check these specifications:

• Bolt pattern: Must be 5×114.3 mm.
• Center bore: The wheel’s center opening must fit over the RAV4’s hub. A larger opening may require a hub-centric ring.
• Wheel diameter: The wheel must provide enough clearance for the brakes and work with an appropriate tire size.
• Wheel width: The width must be suitable for the vehicle and chosen tire.
• Offset: This determines how far the wheel sits inward or outward. An incorrect offset can cause suspension, fender, or clearance problems.
• Brake clearance: The wheel must clear the brake calipers and other components behind the wheel.
• Tire size: The tire must be compatible with the wheel and provide adequate clearance when steering and driving.
• Load rating: The wheel must be rated to safely support the RAV4.
• Lug hardware: The lug nuts or bolts must match both the vehicle and the wheel’s mounting design.

For example, suppose you find an aftermarket wheel with a 5×114.3 bolt pattern. It may appear to be a match, but if its offset places the wheel too far inward or it does not clear the brake caliper, it is not a proper fit.

The safest approach is to treat 5×114.3 as the starting point, not the complete fitment specification. Always compare the wheel’s full specifications with your exact RAV4 model year and trim before purchasing.

Read More: Best Tires for Toyota RAV4

How to Check RAV4 Wheel Fitment Before Buying

Finding the correct bolt pattern is easy. The important part is checking the rest of the wheel specifications before spending money.

1. Identify your RAV4’s model year and trim.
Factory wheel specifications can vary between years and trims.

2. Confirm the bolt pattern.
For the U.S. RAV4 model years covered here, the pattern is 5×114.3 mm (5×4.5 inches).

3. Check the center bore.
The commonly listed RAV4 hub bore is 60.1 mm. Make sure the wheel’s center opening clears the hub.

4. Verify wheel diameter and width.
Check both measurements against the specifications for your RAV4 and the tire you plan to use.

5. Check the offset.
The correct offset keeps the wheel in a suitable position relative to the suspension and fender.

6. Confirm brake and suspension clearance.
This is especially important with aftermarket wheels, where spoke shape and offset can affect clearance.

7. Verify tire size and load requirements.
The tire must be suitable for the wheel and vehicle, with enough clearance and an appropriate load rating.

8. Confirm the lug hardware.
Check that the lug nuts match the wheel’s seat design and the vehicle’s thread specification.

If a wheel seller provides a vehicle-specific fitment listing, use that information as another check rather than relying only on the 5×114.3 measurement.

How to Measure a 5-Lug Bolt Pattern

If you’re checking an unknown five-lug wheel, first count the lug holes. A five-lug pattern is measured differently from a four- or six-lug wheel because there is no lug hole directly opposite another one.

For a five-lug wheel, measure from the center of one lug hole to the outer edge of the lug hole farthest from it. The result should be close to 114.3 mm (4.5 inches) for a RAV4 wheel.

Simply measuring between two neighboring lug holes will give you a smaller distance and can lead to confusion.

Because a small measuring error can make similar five-lug patterns look closer than they really are, checking the wheel manufacturer’s specifications is usually the better option when that information is available.

Visual tip: A simple diagram showing the five lug holes, the bolt circle, and the 114.3 mm measurement would make this measurement easier for beginners to understand.

Are Toyota RAV4 Wheels Interchangeable Between Years?

Some RAV4 wheels may fit different model years, but you should never assume they are interchangeable just because they share the same 5×114.3 bolt pattern.

Before moving a wheel from one RAV4 generation to another, compare its center bore, offset, wheel width, and diameter with the requirements of the vehicle receiving it.

You also need to confirm brake clearance and make sure the tire is the correct size and has an appropriate load rating.

For example, an older RAV4 wheel may have the correct 5×114.3 pattern but a different width or offset that does not work properly on a newer RAV4.

The 2026 RAV4 is particularly important to check carefully because it is an all-new sixth-generation model. Its bolt pattern remains 5×114.3 in current fitment data, but that does not make every previous-generation wheel an automatic direct-fit option.

The safest approach is to compare the complete wheel specifications, not just the bolt pattern.

Read More: Toyota RAV4 Tire Pressure

Toyota RAV4 Bolt Pattern FAQs

What is the Toyota RAV4 bolt pattern?

The Toyota RAV4 uses a 5×114.3 mm bolt pattern, also written as 5×4.5 inches. It is a five-lug pattern with a 114.3 mm bolt-circle diameter.

Is the RAV4 bolt pattern 5×114.3?

Yes. U.S.-market RAV4s from the 1996 model year through 2026 use the 5×114.3 mm bolt pattern according to the fitment data reviewed for this guide.

Is 5×114.3 the same as 5×4.5?

Yes. 5×114.3 mm and 5×4.5 inches describe the same bolt pattern. The 114.3 mm measurement is approximately 4.5 inches.

What is the Toyota RAV4 center bore?

The commonly listed RAV4 center bore is 60.1 mm. When selecting aftermarket wheels, make sure the wheel’s center opening clears the vehicle’s hub.

What lug thread does a Toyota RAV4 use?

RAV4 fitment references commonly list M12x1.5 lug threads. For aftermarket wheels, also confirm that the lug nuts have the correct seat design for the wheel.

Are RAV4 wheels interchangeable between years?

Some may be, but compatibility must be checked individually. The same bolt pattern does not guarantee that the wheel’s offset, width, diameter, brake clearance, or tire size will work on another RAV4.

Final Takeaway

The Toyota RAV4 bolt pattern is 5×114.3 mm (5×4.5 inches), and it has remained consistent across U.S. RAV4 model years from 1996 through 2026.

But the bolt pattern is only the starting point when choosing wheels. Before buying or installing a wheel, verify the center bore, diameter, width, offset, brake clearance, tire size, load rating, and lug hardware for your specific RAV4.

If you’re shopping for aftermarket wheels, don’t stop when you see 5×114.3 in the product listing. Confirm the complete fitment before installation.